Duro Dyne® SAC Series 14167 Self-Piercing Point Screw, 1/2 in OAL, Slotted Hex Head, #8 Drive, Zinc-Plated
$7.15
Skip to product information
9 left
Duro Dyne® SAC Series 14167 Self-Piercing Point Screw, 1/2 in OAL, Slotted Hex Head, #8 Drive, Zinc-Plated
$7.15
Duro Dyne® Self-Piercing Point Screw, SAC Series, 1/2 in Overall Length, 1/4 in Head, Slotted Hex Head, #8 Drive, Zinc-Plated
Several common methods such as rivets, screws, and spot welding are used to fasten materials to ductwork. Three types of screws are most often used. The first is self-tapping only and requires a hole to be drilled before the screw can be utilized. The others are both self-tapping but also create their own holes. Selfpiercing screws have very sharp points which act much like a scratch awl in making a small opening in the steel for the threads to engage and work the sheet metal into a coned threaded hole. These work wellfor light gage steel.
- Conformance - Meets or exceeds JIS 1125 specifications for cone point screws
- Material - Cold heading quality steel wire
- Corrosion Resistance - Zinc plated
- Hardness - Case hardened to Rockwell C55 minimum
- Head Configuration - Hexagonal slotted
- Twin lead point (two continuous threads)
Specifications
| Head Size | 1/4 in |
| Correct Item Group | Fasteners & Hardware |
| Thread Size | #8 |
| Finish | Zinc-Plated |
| Drive Size | #8 |
| Head Type | Slotted Hex |
| Drive Type | Slotted |
| Material | Steel |
| Overall Length | 1/2 in |
| Series | SAC Series |
| Point Type | Self-Piercing |
This product is supplied by a Remsco Partner, please allow an additional 2-3 days of processing time when ordering.